Basic Troubleshooting

Charging the Eargo Devices

42 views March 31, 2016 June 21, 2017 Eargo ® 1

 

Charging the Eargo devices

When it comes time to charge your Eargo devices, simply insert them into the charger, one Eargo at a time. Gently wiggle them into the cradles with the domes facing inward and the removal threads out and up. Do not force them into place – a little wiggle, and they slide right into place.

When inserting your Eargo into the cradle, gently push straight down on the black body of the Eargo above the gold contacts, not on the white Flexi Fibers.

When the charging light under the Eargo changes from solid blue to solid white, charging will begin. This charging light may flash blue for a few seconds before turning solid white when you first insert the Eargo. This is normal. But, if this charging light continues to flash blue for an extended period of time, or remains solid blue, the Eargo is not inserted correctly. Remove and re-insert the Eargo.

You will know you’re all set when the charging lights under the Eargo devices remain solid white, and the indicator lights on the outside of the charger start scrolling.

Keywords: charging, eargo device, inserting, blue light, white light, flash blue

Source: User Guide

User Guide Part #: LBL0018

Revision: REV_C

Was this helpful?